Mower Blade Saving The Time Of The Herbicide Workers

In our usual home garden finishing, the most commonly used garden tool is nothing more than the chain saw, high oil saws, there is the Mower Blade. And usually the most common mower is the kneeling Mower Blade. This mower features a lot, mainly in the following:

High efficiency: the general use of this Mower Blade, its effect is equivalent to 16 times the artificial weeding, to quickly complete the operation;

Benefit: If it is for the orchard weeding, because of its fast rotation, cutting effect is very good, especially for the tenderness of the weed cutting the best. Generally one year in addition to three grass can be;

To maintain soil and water: artificial hoe weeding, due to weeding at the same time loosening the topsoil, it will often cause a certain soil erosion, artificial hull in the ladder, resulting in soil erosion will be more serious. And if the use of mower mowing, because only part of the exclusion of the ground, the soil almost no effect, coupled with the role of grass-roots solid soil, to maintain soil and water is extremely favorable;

Can increase the fertility: the use of Mower Blade weeding, in general, in addition to the grass can cover the whole orchard, can be used as orchard organic fertilizer, increase soil fertility.

The use of such Mower Blade technical points is: weeds generally in 10-13 cm for the best weeding time. If the weeds are too high, the best step in two steps, first cut the upper part, and then cut the lower part. When using the Mower Blade, keep the hands on both sides and keep a certain degree of inclination on the side of the fruit tree so that the chopped weeds fall as far as possible on the edge of the fruit tree and can be used as organic fertilizer.

The lawnmower is a mechanical tool used to trim lawns, vegetation, etc. It consists of a cutterhead, an engine, a walking wheel, a walking mechanism, a blade, a handrail, and a control part. The cutterhead is mounted on the running wheel, the engine is mounted on the cutterhead, the output shaft of the engine is equipped with blades, and the blade uses the engine to rotate at high speed to improve the speed, which saves the worker's working time and reduces the amount of human resources.